Notes from the routing bench
Signal integrity, manufacturability and KiCad workflow — written by the engineers who review every board we deliver. Worked numbers, no fluff.
RSS feed · Questions about a post? Ask an engineer.
Trust, but diff: checking that a routed board changed only its copper
When someone else routes your KiCad board, how do you know nothing else moved? What our before/after comparison checks, and how to reproduce it with Git.
Signal integrity · KiCadDifferential pairs in KiCad: naming, coupling, skew and the return path
How KiCad recognises differential pairs, what matters when routing them (impedance, skew, coupling, reference planes) and how to hand them to a router.
DFM · ViasAnnular rings, drill sizes and the three reasons fabs push back on vias
What the annular ring really is, how finished and drilled hole sizes differ, and how to pick via sizes that pass a fab’s CAM check the first time.
Signal integrity · Stack-upControlled impedance on a 4-layer board: a worked 50 Ω microstrip example
How wide should a 50 Ω track be on the outer layer of a typical 4-layer stack-up? A step-by-step IPC-2141A estimate, its sensitivity, and when to use a field solver.