Mixed-signal · IPC-2221

Quiet analog, fast digital, one solid ground.

Mixed-signal boards need partitioning by placement and discipline in routing: digital return currents must never cross under the analog front end. We route with the return path as a first-class constraint.

Ground strategy
solid reference
Guarding
per net class
Region rules
from KiCad rule areas
Cross-region report
included
The hard parts

What goes wrong on Mixed-signal boards

01

Return currents under analog

Digital nets are kept out of the analog region on every layer, and their return paths are checked against the plane beneath them.

02

Reference and clock hygiene

Clock and reference nets are guarded and routed with minimum length and layer changes.

03

Decoupling placement

Decoupling capacitors are connected with the shortest via-in-pad or via-adjacent path the fab allows.

Our approach

How QodeX handles it

  • Region keep-outs derived from rule areas in your KiCad board
  • Guard traces and stitching for sensitive nets
  • Solid, unsplit ground by default — splits only where you draw them
  • Report of every net crossing a region boundary

Frequently asked

Do you split AGND and DGND?

Only if your design calls for it. The default is a solid plane with partitioned placement, which is what most modern converters recommend.

Can I mark nets as sensitive?

Yes — use a net class, or list them in the order notes.