QodeX 3D Studio — online KiCad PCB viewer

demo-board.kicad_pcb Samples:
Free online viewer

Inspect a KiCad board in 3D without installing anything

3D Studio renders your board in the browser. Files you open are read and drawn on your own machine; nothing is uploaded, so you can use it on designs under NDA.

Want to know if it powers up? Run the online power-on test on the same file: 32 checks, from shorts to copper heat.

01

Nets, layers and stackup

Hover to inspect copper and click to highlight a whole net. Toggle each layer, fade the solder mask to see the copper under it, and explode the stack to look at the inner planes.

02

Instant DFM pre-check

Screen track width, clearance (pads included), drills, annular rings, edge clearance, acid traps and layer count against JLCPCB, PCBWay, Eurocircuits, Sierra Circuits or generic IPC class 2 rules, with every finding marked on the board.

03

Measure and share

Measure between any two points in millimetres, switch mask colour and surface finish to preview the fabricated board, and save a PNG for a design review.

Supported files

Drop a file anywhere on the viewer or use Open file….

FormatExtensionsWhat you get
KiCad board.kicad_pcbFull board: copper per layer, pours, vias, pads, silkscreen, nets and the DFM pre-check
Gerber + drill package.zip, .gbr, .gtl, .gblBoard rebuilt from the fabrication files, with X2 net names when present and the DFM pre-check
STEP model.step, .stpMechanical model with components, for enclosure checks
glTF.glb, .gltfRendered 3D model, as delivered with every QodeX order
Mesh.stl, .obj, .wrlPlain 3D meshes, including KiCad VRML exports

Questions

Is my board uploaded anywhere?

No. The Studio parses and renders files inside your browser tab. Only the sample boards are downloaded from our server; files you open never leave your machine.

Is the DFM pre-check a full DRC?

No. It is a fast screening pass for the rules that most often get a board rejected, checked against the fab's published standard capabilities. Run KiCad's DRC with your fab's rules before ordering; QodeX orders include a full DRC and DFM evidence dossier.

Which KiCad versions are supported?

Boards saved by KiCad 6, 7, 8 and 9 open directly. For a KiCad 5 board, open and save it once in a current KiCad for the most faithful result.

Can QodeX route my board?

Yes. See pricing or start an order: upload your placed board, pay online in USD and receive the routed .kicad_pcb, a 3D model, fabrication outputs and the evidence dossier.