Power electronics · IPC-2152
Copper sized for the current, not for the grid.
High-current paths are widened from the current you specify and the copper weight you order, using IPC-2152 temperature-rise data. Switching loops are kept tight and gate-drive paths short.
- Sizing basis
- IPC-2152
- Copper weight
- 1 – 3 oz
- HV clearance
- per net class
- Thermal vias
- auto-arrayed
The hard parts
What goes wrong on Power electronics boards
01
Conductor sizing
Trace and pour widths are derived from current, copper weight and allowed temperature rise, per IPC-2152.
02
Hot-loop area
Input capacitor, switch and diode/sync-FET loops are routed on adjacent layers to minimise loop inductance.
03
Via current capacity
Via arrays are sized for the current they carry and placed to spread heat into internal planes.
Our approach
How QodeX handles it
- Per-net current annotations from your notes or net-class names
- Thermal via arrays under power pads
- Creepage and clearance checks for high-voltage net classes
- 1 oz to 3 oz copper fabrication options
Frequently asked
How do I tell you the current per net?
Name the net class (e.g. “PWR_10A”) or list the nets and currents in the order notes.
Do you do creepage for mains?
Clearance and creepage rules are enforced from your net classes; certification remains your responsibility.