Moving from a cloud design tool

Your board, out of the cloud
and into files you own.

Browser-based design tools keep your project in their own format. What they do export (manufacturing files, a BOM, a schematic PDF) is enough for us to build your board as it is, or to rebuild it as a native KiCad project you keep forever.

Step 1

Export everything the tool allows.

Most cloud design tools export these; send whatever you can get.

Manufacturing

Gerber and drill files

The copper, mask, silkscreen and holes of every layer, usually as one ZIP. ODB++ works too.

Parts

BOM and pick-and-place

Part numbers, values and positions: the list we rebuild the libraries and placement from.

Circuit

Schematic PDF

The circuit as drawn. With the BOM and Gerbers, it is all we need to recreate the design.

Mechanical

STEP model

The 3D board and parts, for the enclosure fit and to check placement.

Anything else

Notes and constraints

Impedance targets, currents, net classes, design rules: in any form.

Private

Covered by NDA

Everything you send is under the mutual NDA and never used to train AI models.

Step 2

Choose what happens next.

Keep it as it is

Review and build

  • DFM / DRC review of your Gerbers against the fab you choose
  • Fabrication of bare boards, shipped worldwide
  • Instant price for the review and fabrication
Start a review
Own it

Rebuild as a native KiCad project

  • Schematic recreated in KiCad from your PDF and BOM
  • Footprints, symbols and 3D models for every part
  • Layout recreated and checked against your original Gerbers
  • Yours to edit forever, in an open format
Request the rebuild
Make it better

Redesign and route properly

  • Critical nets routed for you: differential pairs, impedance, high-speed
  • 1 to 16 layers, BGA escape, power integrity
  • Online power-on test and engineer sign-off
Custom design
FAQ

Questions about moving

Can you convert my cloud project file directly?

Cloud tools store projects in their own formats, which are not published for other tools. We work from what they export: Gerbers or ODB++, the BOM, pick-and-place and a schematic PDF. From these we rebuild the design in KiCad and check the new layout against your original Gerbers.

How long does a rebuild take, and what does it cost?

It depends on the board. Send the files with a design request and an engineer replies with a fixed price in US dollars and a lead time before you pay anything.

Do I need a subscription afterwards?

No. You get KiCad files, which open in KiCad for free, on your own computer, with or without an internet connection.