Free tool

Impedance calculator

Plan a controlled-impedance stack-up in seconds: microstrip or stripline, single-ended or differential, solve for impedance or for track width. Everything runs in your browser.

Geometry

IPC-2141A closed-form models

Use your fab’s published stack-up for h, b and εr. FR-4 class prepregs are typically εr 4.0–4.6. See the worked 50 Ω example for the maths.

Models and limits

StructureFormula (IPC-2141A)Accurate for
Surface microstripZ₀ = 87/√(εr+1.41) · ln(5.98h / (0.8w + t))0.1 ≤ w/h ≤ 2
Symmetric striplineZ₀ = 60/√εr · ln(1.9b / (0.8w + t))w/b < 0.35, t/b < 0.25
Edge-coupled microstripZdiff = 2Z₀ (1 − 0.48 e^(−0.96 s/h))first-order estimate
Edge-coupled striplineZdiff = 2Z₀ (1 − 0.347 e^(−2.9 s/b))first-order estimate

Propagation delay uses εeff = 0.475·εr + 0.67 for microstrip and εr for stripline (85·√εeff ps per inch). Solder mask, plating, etch factor and resin content are not modelled: they typically move a real board by a few ohms, which is why controlled-impedance boards are ordered with a tolerance (commonly ±10%) and the fab tunes widths on its own stack-up. Use these numbers to plan; confirm them with the fab or a field solver.

Common targets

InterfaceTarget
RF feeds, single-ended high-speed50 Ω single-ended
USB 2.090 Ω differential
Ethernet, LVDS100 Ω differential
PCI Express85 Ω differential