Free tool

PCB unit converter

Convert between millimetres, mils, inches and micrometres, copper weight and foil thickness, and American Wire Gauge sizes. Type in any field and the others update. Everything runs in your browser.

Length

1 mil = 0.001 in = 0.0254 mm

Copper weight

1 oz/ft² ≈ 34.8 µm

Wire gauge (AWG)

solid round conductor

Formulas and assumptions

ConversionFormula
Length1 in = 25.4 mm (exact), 1 mil = 0.0254 mm, 1 µm = 0.001 mm
Copper weightt = oz × 34.8 µm (the conventional 1.37 mil per oz/ft² used in PCB design references)
AWG diameterd = 0.127 mm × 92(36 − n)/39 (ASTM B258); 1/0 is n = 0, 2/0 is n = −1, 3/0 is n = −2, 4/0 is n = −3
AWG cross-sectionA = π · d² / 4
Wire resistanceR/L = ρ / A, ρ = 1.72 × 10⁻⁸ Ω·m at 20 °C

Validity and accuracy

  • Copper weight is nominal. IPC-4562 allows foil tolerances, and fabs often quote 1 oz as 35 µm; plated outer layers finish thicker, and etching or planarisation can leave inner layers thinner.
  • AWG values are for a solid round conductor. Stranded wire of the same gauge has a slightly larger outside diameter and about the same copper area.
  • The AWG formula accepts fractional gauges; standard sizes run from 4/0 to about 40. Results are shown to three or four significant figures.

FAQ

Is a mil the same as a millimetre?

No. A mil (or thou) is a thousandth of an inch, 0.0254 mm. A 10 mil track is 0.254 mm wide.

Why do some references use 35 µm for 1 oz?

“1 oz” means one ounce of copper spread over one square foot. 34.8 µm (1.37 mil) is the conventional design value, many fabs round it to 35 µm, and computing it from the density of pure copper (8.96 g/cm³) gives about 34.1 µm. These differences of a few percent are smaller than normal foil and plating tolerances.

How do I enter 4/0 (0000) gauge?

Type 4/0 or 0000. 1/0 is 0, 2/0 is 00, 3/0 is 000.