High-speed digital · IPC-2141A · JEDEC

Length-matched, skew-bounded, return-path clean.

DDR byte lanes, PCIe lanes and USB pairs are routed as constrained groups: impedance, intra-pair skew and inter-lane length windows are solved together, then verified before anything is written back to your board.

Pair skew target
user-defined (e.g. < 1.5 ps)
Length window
user-defined per group
Diff impedance
85 / 90 / 100 Ω
Stitching
at every reference change
The hard parts

What goes wrong on High-speed digital boards

01

Byte-lane length windows

Data, strobe and mask signals are matched within the window you set, with serpentines placed where they do not couple into neighbours.

02

Intra-pair skew

Differential pairs are phase-matched at the bend where the skew is created, not only at the end of the run.

03

Layer transitions

Reference-plane changes at vias get stitching vias placed next to the signal via so the return current has a short path.

Our approach

How QodeX handles it

  • Net classes and diff-pair rules read directly from your KiCad project
  • Constraint groups for DDR byte lanes, address/command fly-by and PCIe lanes
  • Skew and length verified by a post-route checker before delivery
  • Evidence dossier lists every constrained net with its achieved length and skew

Frequently asked

Which DDR generations?

Routing is constraint-driven, so the same pipeline handles LPDDR4/4X, DDR4 and DDR5 topologies as long as the constraints are provided.

Will you change my placement?

No. Placement is treated as your design intent. If a constraint is unreachable with the current placement, we report it instead of moving parts.