Flex & rigid-flex · IPC-2223

Routed to bend, not to break.

In the flex region copper must follow the rules of a moving part: perpendicular to the bend, curved corners, staggered layers and no vias. We route flex zones with those rules applied automatically.

Standard
IPC-2223
Corners in flex
arcs only
Vias in bend zone
none
Planes in flex
hatched
The hard parts

What goes wrong on Flex & rigid-flex boards

01

Bend-zone copper

Traces cross bend lines at 90°, with arcs instead of corners and staggered positions on adjacent layers.

02

Transitions

Rigid-to-flex transitions get teardrops and keep vias outside the stiffener boundary.

03

Hatched planes

Planes in the flex region are cross-hatched to preserve flexibility.

Our approach

How QodeX handles it

  • Bend lines and flex regions read from KiCad user layers / rule areas
  • No vias or pads inside dynamic bend zones
  • Automatic teardrops on every flex-region pad
  • Coverlay openings checked against the fab’s registration tolerance

Frequently asked

Is flex available now?

Flex and rigid-flex routing is available on request — mention it in the order notes and we will confirm feasibility before you pay.

Static or dynamic flex?

Both. Tell us the bend radius and number of cycles and we pick the rules accordingly.