Use cases

Every board class has its own physics.

The same pipeline, tuned per domain: the constraints that matter for an RF front end are not the ones that matter for a 40 A buck converter.

IPC-2141A

RF & microwave

RF boards fail quietly: a stub that resonates, a ground return that detours around a split, a coplanar gap that drifts with the etch. We route RF feeds as transmission lines first and copper second — solved against your actual stackup, not a default.

Explore RF & microwave
IPC-2141A · JEDEC

High-speed digital

DDR byte lanes, PCIe lanes and USB pairs are routed as constrained groups: impedance, intra-pair skew and inter-lane length windows are solved together, then verified before anything is written back to your board.

Explore High-speed digital
IPC-2152

Power electronics

High-current paths are widened from the current you specify and the copper weight you order, using IPC-2152 temperature-rise data. Switching loops are kept tight and gate-drive paths short.

Explore Power electronics
IPC-2221

Mixed-signal

Mixed-signal boards need partitioning by placement and discipline in routing: digital return currents must never cross under the analog front end. We route with the return path as a first-class constraint.

Explore Mixed-signal
IPC-2223

Flex & rigid-flex

In the flex region copper must follow the rules of a moving part: perpendicular to the bend, curved corners, staggered layers and no vias. We route flex zones with those rules applied automatically.

Explore Flex & rigid-flex
IPC-2226

HDI & microvia

Dense BGAs are an escape-routing problem before they are a routing problem. We solve the fan-out pattern ring by ring using the via technology your fab supports — through, blind, buried or laser microvias.

Explore HDI & microvia

Your board doesn't fit a category?

Most real boards are several of these at once. Tell us what matters in the order notes, or talk to an engineer first.